Guidelines for Optimal Maintenance and Safety

» Posted by on Jan 7, 2019 in Maintenance | 0 comments

1. Test the correct functioning of all controls of the boiler which include the pressure relief valve, gauge glass, temperature controls, thermometers, low water cutoff devices, and pressure gauge.

2. Confirm that your boiler has no signs of overheating, erosion or corrosion.

3. Test all blow-offs and drains in order to make sure that they are all functioning accordingly.

4. Make sure that every shut-off valve is leak tight. If not so sure, perform leak tightness test.

5. Check your fuel system in case of leaks and make sure that all fuel strainers and filters have been changed.

6. Make sure that all valves in your instrument lines are operating as they should.

7. Verify that the vent valve on boilers is functioning as needed and that the vent isn’t clogged.

8. Open the top try cock or boiler vent valve to vent air as well as fill the boiler with water that is treated to its appropriate level. In addition to that, check the expansion tank if it is filled properly.

9. Verify that the flame sensors or scanner are functioning and properly connected.

10. Make sure that the re-circulation pump functions as needed.

11. Check that every heating system isolation valve is properly functioning.

12. Check all safety devices and instruments for proper setting. Make sure that your water pressure regulator operates as needed.

13. Test safety valves every now and then. Replace leaking safety valves as required. Relief valves or test safety by pulling the test lever once in a year.

14. Verify that there should be no leaks from any portion of the boiler or the piping external to boiler. Have these cracked surfaces fixed by a professional and licensed repair company as soon as possible. Furthermore, bulges or other deformities signify improper burner operation, safety devices or defective controls.

15. Verify that low water fuel cutoff valve shuts off the supply of fuel to the boiler as needed. Examine it for proper operation and sequence as well.

The Importance of Boiler Maintenance

Having your Mantención de Calderas Roca serviced once in a year or on a regular basis is a very good practice. It will not only save you significant amount of money but also, it can decrease the chance of carbon monoxide poisoning as well as expensive repairs of faulty boilers.

It is very essential to get your gas appliances or any boiler serviced on a regular basis in order to make sure that they are not just safe but on top condition as well.

Having your boiler serviced on a regular basis can definitely decrease your fuel expenses by up to 10 percent every year.

Appliances that are not well maintained can produce carbon monoxide. As a matter of fact, an exposure to this kind of poison can be very harmful to human’s health (even in a small amount of carbon monoxide can cause permanent damage).

Any problems or faults with the boiler can be determined early on, decreasing the risk of costly repairs over time.

Submit a Comment

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>